NFPA20 fire pump package

The XBD-P Series fire pump packageis including electric fire pump,diesel fire pump and jockey pump,also with some pipes, valves, water tank, control panel, the main pump is usually end suction pump or split case pump, the pumps are combined to make a fire system, the fire systems provide the reliable fire control available from every Sentinel pump product at less cost and in less space.

Features:
·         Delivered complete, ready for immediate installation on simple foundations
·         Ease of site connection saves time and labor costs
·         Pumping equipment designed to NFPA20 fire protection rules is installed in standard size containers for delivery without police escort
·         Built in a clean, controlled factory environment to a high engineering standard
·         Fully tested and pre-commissioned using advanced computerize testing facilities
·         Individually engineered to customer requirements
·         Containerize CAD design saves floor space
·         Wall insulation reduces environmental noise
·         Single responsibility for complete pump house eliminating site coordination problems
·         Planned maintenance contract available

Submersible pump sewage pump for waste water treatment

 WQ type submersible sewage pumps are used as single or double flow channel impeller and wide pump body, allow solids passing through easily and fiber uneasily wound, made it most suitable to discharge sewage and dirt. And it’s distinctive design of double channel and large passage impeller effects high efficiency.

Product name : WQ submersible non-clog sewage pump , dredge pump

Features :
---Flood-proof motor with IP68 Protection class
---Large free passage impeller employed
---Built-in thermal motor protector
---Heavy-duty double mechanical seals
---Special design of cable connector is reliable to avoid any liquid ingress

Data sheet :
---Flow: 18-3750m3/h
---Head: 5-60m
---Material: cast iron, SS304, SS316
---Temperature: 80℃

Application:
---Pumping of civil and industrial wastewater and sewage
---Sewage treatment plants
---Surface water drainage

Vertical multistage pump for fire -jockey pump

The XBD-CDL vertical multistage fire pump is mainly used as jockey pump.The function is to maintain the pressure in the fire fighting system, the capacity is not required to be large as main pump, but the pressure should be same or a little higher than main pump, it is designed as per NFPA20 standard.

A jockey pump is sized for a flow less than the flow to one sprinkler in order to ensure a system pressure drop. Hence a jockey pump is an important part of the fire pumps control system.

Features:

·         Flow is up to 660 GPM

·         Pressures up to 290PSI

·         In compliance with NFPA 20,UL and ANSI

·         Vertical multistage design

·         Working pressure is up to 2.5Mpa

·         Standard material: SS304,mechanical seal

·         Special material: can be SS316 or SS316 as per different liquid

·         Available in 50 or 60HZ.

CDLF vertical multistage pump, booster pump, RO pump, stainless steel pump,vertical multistage fire pump

            
                                          CDLF Vertical multistage pump



  CDLF Vertical Multistage centrifugal Pumps adopt stainless steel AISI304 or 316, special in high 

pressure. Impeller,guide vane and all parts contact with liquid are of stainless steel punched and
welded, so the flow road is very smooth and prevent producing second pollution. Shaft and sleeve
are of hard alloy and adopt wear resistant mechanical seal, having super service time and no-leakage.

Product name : CDLF vertical multistage pump( equivalent to Grundfos)
Type : CDLf2 , CDLF4, CDLF8,CDLF16, CDLF32, CDLF 42, CDLF65, CDLF85 ,CDLF120, CDLF150

Features:
---Hot and cold clean, non-flammable and non-explosive liquid without solid grain and fibre. If for explosive liquid should choose explosion-proof motor.
---Mineral water, soft water, pure water, edible oil and other light chemical mediums
---When the density or viscosity of liquid is larger than that of water, it is necessary to select a driving motor of high-power

Application:
---Urban water supply and pressure boosting
---Industrial circulating system and processing system
---Water supply for boiler, condensing system, high-rise building or fire fighting system.
---Water treatment and infiltration system
---Agricultural irrigation
---Cooling water system
---Many other domestic and industrial special applications

What is a submersible sewage pump and the application?

    WQ type submersible sewage pumps are used as single or double flow channel impeller and wide pump body, allow solids passing through easily and fiber uneasily wound, made it most suitable to discharge sewage and dirt. And it’s distinctive design of double channel and large passage impeller effects high efficiency.

Product name : WQ submersible non-clog sewage pump , dredge pump
Features :
---Flood-proof motor with IP68 Protection class
---Large free passage impeller employed
---Built-in thermal motor protector
---Heavy-duty double mechanical seals
---Special design of cable connector is reliable to avoid any liquid ingress

Data sheet :
---Flow: 18-3750m3/h
---Head: 5-60m
---Material: cast iron, SS304, SS316
---Temperature: 80℃

Application:
---Pumping of civil and industrial wastewater and sewage
---Sewage treatment plants
---Surface water drainage

submersible pump, water pump,vertical pump, sludge pump

D280-65*6 type horizontal multistage pump used in mine for dewatering-produced by Shanghai Guomei Pump Co.,ltd

D280-65*6 type horizontal multistage pump is high pressure pump, the head is up to 390m, the material is cast iron, but can also be stainless steel, duplex stainless steel, bronze, fore more details, pls check our web: www.gm-pumps.com

horizontal multistage pump, multistage pump, multistage pump manufacturer, guomei pump 

NFPA20 fire pump -Spark fire

Split Case Diesel Driven Fire Pump
 The XBD- HS Series Fire Pump is diesel driven and usually used as main fire pump in the fire fighting system,it is designed to provide water to stand pipe, sprinkler, chemical mitigation and hydrant systems for fire fighting application.It is widely used as it can be used once without electricity and electric fire pump can’t start, the pump and diesel engine are completely designed as per NFPA20 standard, this pump is widely used to instead of to Peerless AEF series
 

Features:
• Flow is up to 5,000 GPM
• Pressure is up to 290PSI
• Diesel driven fire pump
• Can be used even without electricity
• Pump material:cast iron casing, bronze/SS304 impeller,SKF bearing,gland packing
• Special material is available like duplex stainless steel 2205 when pump sea water
• In compliance with NFPA 20,UL and ANSI
• Dynamic balance impellers.
• Grease lubrication.
• Available in 50 or 60HZ.
• Suction and discharge flanges are on a common center-line.
• It can also be specially designed as per customer’s request

All of our fire pumps are strictly tested before delivery to guarantee the quality : www.firepump.cc

fire pump under testing